In this article, we review the Enclave CineHome Pro Home Theater Surround Sound System. We will also list Enclave CineHome Pro 5.1 or Enclave CineHome II 5.1 Home Theater Audio Black Friday & Cyber Monday deals, sales, or discounts to save big.
[wpdatatable id=17]
Enclave CineHome Pro 5.1 Black Friday & Cyber Monday Deals 2022
We’re going to be taking a look at the Enclave Cinna home pro 5.1. We get an accessories box containing some documentation a pair of white gloves to keep the fingerprints away, and here we have six power cords for each speaker in the second box. We have a quick start-up guide for the power supply for the hubs, and we have the HDMI cable and the Cinna home hub.
Setup
This is a 5.1-channel setup. You will get a dedicated center channel, and two left and right speakers, each measuring 5.3 inches deep by 24 points one inch wide by three-point four inches high, and they each weigh 8 pounds.
All three speakers have two three-inch woofers and a one-inch soft dome tweeter. The surroundings are a little smaller, measuring three point four inches wide by sixteen points one inch high by five point three inches deep, and they weigh five pounds. They have a single three-inch driver and a soft old tweeter. Check out Samsung HW-Q60T Black Friday Deals.
Measurement
The system also comes with a fairly large subwoofer; it measures 12 inches wide by 18 points, 8 inches high by fourteen point four inches deep, and weighs 27 pounds, and you’ll find a 10-inch driver inside.
The sealed enclosure controlling all of the speakers is the hub in the back are inputs for HDMI, which supports EARC optical and a 3.5-millimeter input.
App Control
You’ll have to download the Enclave app on either Android or iOS. Once you open the app, it’ll prompt you to set up the system and give you a little tutorial on plugging everything in and the speaker placements once.
It finds the hub. Just click connect; all speakers should be highlighted orange if they are connected to the hub under settings up top. It’ll show you the audio format that’s playing; this is the Apple TV, so it’s in PCM, but you can see.
Sound Quality
I’ve got Dolby Digital and DTS here as well for ProLogic mode. You have a few presets depending on what sounds good to you’ve got a couple of dynamic range presets full room stereo.
If you’re throwing a party for a room set up, this is where you’ll put in the distance for each one of the speakers under speaker level if you touch on a speaker. It’ll play a test tone through it.
Dolby Atmos & DTS
Use your sound level meter to match up all the speakers, and you’ll be good to go and lastly, time to check for a firmware update, and of course, there is one. This whole process takes about 10 minutes.
Once you restart it, you should see the new firmware version. This is a stereo, and this is the OPM’s world of sound to tell any story. It catches all the little details, puts your Center in action and transports you far away inside the story with breaker Simmons Dolby atmos.