In this article, we review the Brother Serger 1034D Overlock Machine. We will also list Brother Serger 1034D Black Friday / Cyber Monday / Prime Day deals, sales, or discounts to save big.
Brother Serger 1034D Overlock Machine Black Friday Deals 2021
Today we are going to be talking sergers, more specifically the brother 1034d. If you are sewing with the knit fabric getting a serger is game-changing. It will make sewing knit fabric quick and easy, plus it gives it a nice clean, professional finish on the inside.
When you get your serger out of the box, it will come with a different color thread that coordinates your tension discs. This makes it easy to practice your threading or adjust your tensions on your loopers; everything is color-coordinated. When you’re threading, which makes it easy for me personally.
It’s easier to snip the threads and re-thread them from start to finish. It would help if you threaded it in the correct order with this machine. It will be your upper looper, your lower looper, your right needle, and your left needle. It is always a good idea to get a scrap piece of fabric from the project you’re working on to see how your serger handles that type of fabric.
Materials to Sew
You’ll have different settings for a heavier-weight material compared to a jersey knit, and you’ll want to make sure you have that all right before you get started. When you go to sew with your serger, you’ll want your presser foot up, and you’ll want your knife if you’re going to be using the knife on your serger in an upright position, and you’ll stick put your fabric in and lower the presser foot.
If you don’t lower the presser foot, the stitches will be wonky and messed up sometimes when I’ve sewn with thicker fabric.
The three most common stitches on a serger are the four-thread overlock. The three-thread narrow overlock and the rolled hem on the Brother 1034D. It is super easy to switch from a four-thread to a rolled hemstitch.
We need to remove the left needle, so I’m going to snip the thread at the top of the needle and pull the thread out of the serger. You want to pull off the spool. The threads are dangling it finds its way in believe me not worth the hassle so if you’re only using three threads there should only be three spools on the top of the machine.